Temperature Simulation
The temperature simulation module (1) can simulate temperatures at different operating scenarios. Choose the desired scenario (2) and operation type (4), and simulate the temperature.
The simulation results are visualized in the Sim Temperature tab (1) shown below.
Choose to display a specific section or all sections (2). The temperatures can be inspected at any point in time within the simulation through the pullable bar (3).
The simulation itself can be seen through a playable animation (1) displayed below. Start, stop, forwarding, and rewinding the animation is done through the video interface (2).
Figure x.x: Temperature animation.
Flow propeties are calculated in the simulation an presented in a table in a separate tab (1) shown below. Properties can be extracted at any point in time through the pullable bar (2).
Last modified 3mo ago
Copy link